Pre-Pour, Pre-Drywall, Final: When Should You Inspect a Katy, TX New Build?

TL;DR: For a new build in Katy, TX, schedule your own inspections at three phases: pre-pour (after the foundation forms, plumbing, and post-tension cables are set, before concrete), pre-drywall (after framing and mechanical rough-ins, before the walls close), and final (before your builder orientation and closing). Much of the Katy area sits outside city limits in unincorporated Fort Bend, Harris, or Waller County, where Texas law has the builder hire the code inspector. Niky Barker with the Barker Group at Keller Williams Signature helps West Houston buyers write these inspections into the builder contract before construction starts.
Inspect a Katy, TX new build three times: before the slab is poured, before drywall goes up, and before closing. Each phase hides the work of the one before it, so book all three before construction starts.
If you're buying new construction anywhere in the Katy area, including ZIP codes 77493, 77494, and 77449, your home may sit in Harris, Fort Bend, or Waller County, all part of the Greater Houston Area of Texas. The timing of your inspections matters more than the number of them. Niky Barker, REALTOR® and Team Leader of The Barker Group at Keller Williams Signature in Katy, TX, works with new construction buyers across West Houston, and this guide covers when each phase inspection happens, who else is already inspecting the house, and how to protect your access before you sign.
What Is a Phase Inspection on a Katy, TX New Build?
A phase inspection is an inspection you hire at a specific construction stage of a new build in Katy, TX, before later work covers what was done. The three standard phases are pre-pour (the foundation), pre-drywall (framing plus the plumbing, electrical, and HVAC rough-ins), and final (the finished home). In Texas, these are typically performed by a professional inspector licensed by the Texas Real Estate Commission, and they are separate from any city or county code inspection the builder schedules.
Who Is This New Build Inspection Guide For in Katy, TX?
Buying a to-be-built home where construction hasn't started yet
Buying a home already under construction, with one or more phases still ahead
Moving from a resale home into new construction for the first time
Buying a new build as an investment or rental property
Relocating to the Katy area and buying a home you'll watch get built from a distance
Who Is Already Inspecting a New Build in the Katy Area?
It depends on whether the lot is inside the City of Katy or in an unincorporated part of the county. Inside city limits, the City of Katy Permits and Building Department issues permits and runs inspections, and the city has adopted the 2021 International Codes. A certificate of occupancy is required before a new home is occupied.
Much of the Katy area, though, is outside the city. Many master-planned communities with Katy addresses sit in unincorporated Fort Bend, Harris, or Waller County, served by a municipal utility district rather than a city building department.
In the unincorporated area of a county that has opted in, Texas Local Government Code Section 233.154 requires at least three inspections: at the foundation stage before concrete is placed, at the framing and mechanical stage before drywall, and when the home is complete. Fort Bend County adopted that order in 2010, according to the Fort Bend County Commissioners Court order. The statute also makes the builder responsible for contracting those inspections, and the builder may use the same inspector for all three.
Those are code-compliance checks the builder arranges. They are not a review of the work on your behalf.
When Should You Schedule the Pre-Pour Inspection?
Schedule the pre-pour inspection after the foundation forms, under-slab plumbing, vapor barrier, and post-tension cables are in place, and before the concrete is poured. Many Katy-area homes are built on post-tension slab foundations, and this is the only time you can see how that slab was set up.
The window between forms set and concrete poured can be short. Ask the builder's construction manager how you'll be notified when the forms are ready, and line up your inspector in advance. Some builders have their own engineer review the slab in the same window, so ask whether your inspector can attend alongside that visit.
Form dimensions and beam depths compared to the plans
Post-tension cable placement and the supports holding cables in position
Under-slab plumbing locations and any visible damage
Vapor barrier coverage, laps, and penetrations
When Should You Schedule the Pre-Drywall Inspection?
Schedule the pre-drywall inspection after framing, roofing, windows, and the plumbing, electrical, and HVAC rough-ins are complete, ideally before insulation goes in. Once insulation and drywall cover the walls, those systems are hidden for good.
Framing, headers, and structural connections
Electrical rough-in, box placement, and nail plates that protect wiring
Plumbing supply and drain lines
HVAC duct routing, sealing, and supports
Window and door flashing and roof penetrations
If your budget covers only one phase inspection, many inspectors point to pre-drywall, because it reviews the most systems in a single visit.
What Does the Final Inspection Catch That the Builder's Walkthrough Doesn't?
The final inspection is a full inspection of the finished home, scheduled before your builder orientation so its findings land on the punch list before closing. A builder walkthrough tends to focus on finishes. An independent inspector also tests the roof, attic, appliances, electrical panel, plumbing, HVAC performance, and lot grading and drainage.
Plan a second visit around month 11 after closing. Many builder warranties include a one-year workmanship period, and an 11-month warranty inspection documents what needs repair while that coverage is still in place.
How Do You Get Phase Inspections Into Your Builder Contract?
Ask for written inspection access before you sign the purchase agreement, not after the slab is poured. Builder contracts are written by the builder, and many set their own rules for third-party inspections, such as advance notice, a licensed and insured inspector, a site-access waiver, or a limit on visits.
Get the builder's inspection policy in writing, including notice periods
Confirm your inspector's license on the TREC license holder search
Ask how you'll be notified when each phase is ready
Ask how the builder responds to inspection findings, and how quickly
If you want someone at your side for that conversation, new construction buyer representation in Katy means registering with you on the first visit and reviewing the builder's contract and numbers before you sign.
I have worked with a lot of buyers purchasing new construction and to all of them I give the same advise, HIRE an INSPECTOR that will work for you, it is not attached to me, it is totally your choice who to hire but make sure you have one. An inspection either in phases when building or final when buying an inventory home it is extremely important.
How Does Inspecting a New Build in Katy Compare to Fulshear and Cypress?
The three phases are the same in every West Houston market. What changes is who else is inspecting the home.
Katy area: Inside City of Katy limits, the city permits and inspects. Many Katy-address communities sit in unincorporated Fort Bend, Harris, or Waller County, where the builder contracts the code inspections.
Fulshear: Fulshear is an incorporated city, but several Fulshear-address communities fall outside city limits. One clue is the tax bill: homes outside the city show no City of Fulshear tax line.
Cypress: Cypress is an unincorporated community in Harris County, so there is no city building department. Ask the builder which inspections the county requires and who performs them.
What stays the same: Your own pre-pour, pre-drywall, and final inspections, plus the 11-month warranty visit, apply in all three markets.
Why Does This Matter for New Construction Buyers in Katy, TX?
The common assumption is that "inspected" means someone checked the home for you. In unincorporated parts of the Katy area, the code inspector is hired by the builder and confirms code compliance, not workmanship on your behalf. That makes your own phase inspections the only independent review of the foundation and framing before they're covered. Looking ahead, the practical move is to treat inspection access as a contract term, negotiated alongside price and incentives, because your leverage to secure it is highest before you sign and lowest once the slab is poured.
What Am I Seeing in the Katy, TX Market Right Now?
Most of the new construction buyers I talk with in Katy assume the city inspects every home. Many of the communities they tour sit in unincorporated county areas where that isn't how it works, and it changes how I advise them. I also see buyers spend their sales-office questions on price, incentives, and rate buydowns, which makes sense, but inspection access rarely comes up unless someone raises it. I'd rather ask on the first visit, while the builder still wants the contract, than after construction starts. And when a buyer is relocating and can't be on site, I'd rather the inspector's photos be the record of what's behind the walls than anyone's memory of a walkthrough.
Niky Barker leads The Barker Group at Keller Williams Signature, a real estate team based at 920 S Fry Rd in Katy, TX, serving new construction buyers across Harris, Fort Bend, and Waller counties in the Greater Houston Area of Texas.
What Do New Construction Buyers Most Want to Know About Inspections in Katy, TX?
What is a pre-pour inspection on a Katy, TX new build?
A pre-pour inspection reviews a new home's foundation in Katy, TX before concrete is placed. Your inspector checks form dimensions, beam depths, post-tension cable placement, under-slab plumbing, and the vapor barrier against the plans. It's the only time those parts of the foundation are visible, so it has to happen in the short window after the forms are set and before the concrete arrives.
Do you still need a pre-drywall inspection if the county requires one?
Yes. Where a county requires phase inspections, Texas law makes the builder responsible for hiring that inspector, and the inspection confirms code compliance rather than reviewing the work for you. A pre-drywall inspection you hire works for you, covering framing, wiring, plumbing, ductwork, and flashing before insulation and drywall hide them. The two serve different purposes, so one doesn't replace the other.
How is inspecting a new build in Katy different from Fulshear or Cypress?
The inspection phases are the same; who else inspects changes. A community with a Katy address may sit in unincorporated Fort Bend County, part of the Greater Houston Area of Texas, rather than inside the City of Katy, which permits and inspects homes within its limits. Cypress is unincorporated Harris County, and several Fulshear-address communities fall outside Fulshear city limits.
Can a builder limit third-party inspections in Texas?
A builder can set conditions on third-party inspections through its purchase agreement, because builder contracts are written by the builder. Common conditions include advance notice, a licensed and insured inspector, a site-access waiver, and a cap on visits. Ask for the inspection policy in writing before you sign, since the contract you accept usually decides what access you have during construction.
Why does inspection timing matter more than the number of inspections?
Each phase covers up the work from the phase before it. Concrete hides the foundation's cables and plumbing, and drywall hides framing, wiring, and ductwork. An inspection booked a few days late can miss the one stage it was meant to see. Arranging all three phases before construction starts, including how you'll be notified, protects you more than adding inspections later.
When should you schedule the 11-month warranty inspection?
Schedule it around month 11 after closing, before the one-year workmanship coverage included in many builder warranties ends. The inspector documents issues such as settling cracks, roof or plumbing leaks, and HVAC performance so you can submit them to the builder while they're still covered. Check your own warranty document for its exact terms and claim deadlines.
Related Resources
Work with us: New construction buyer representation in Katy, TX
Community guides: What Fulshear buyers give up in a builder contract · How to buy new construction in Cypress, TX without overpaying
Other Questions Buyers Ask About New Build Inspections in Katy, TX
How much does a phase inspection cost in Katy, TX?
Can you attend your own pre-drywall inspection?
What happens if the inspector finds a problem before the pour?
Should you inspect a new build that's already finished?
How do you submit inspection findings to a builder?
If you're touring new construction in Katy, Fulshear, or Cypress and want inspection access settled before you sign, Niky Barker with The Barker Group at Keller Williams Signature can help. Start with our new construction buyer services in Katy, TX and bring your questions to the first builder visit.
About Niky Barker
Niky Barker is a REALTOR®, MRP, and AI-Certified Team Leader at The Barker Group | Keller Williams Signature, serving buyers and sellers across Katy, Fulshear, Cypress, Richmond, Brookshire, and the Greater Houston area. She works with new construction buyers from the first builder visit through closing, with a focus on reading builder contracts before they're signed. To connect, visit The Barker Group contact page or call 917-399-7099.
The Barker Group | Keller Williams Signature | 920 S Fry Rd, Katy, TX 77450



